Engineering stress-strain curves are generated from tensile tests on semi-crystalline thermoplastics, which may exhibit non-linearity and/or peak stress associated with striction/necking phenomenon of the specimen at the macroscopic scale. This work addresses this state of deformed specimen, on an isotactic polypropylene, where irreversible strains have led to a variable cross-sectional area along the necked region. 3D images in this region, obtained through Synchrotron Radiation Computed Tomography with two high resolutions are exploited. The best resolution (1 pixel length = 0.05 μm) allowed better understanding of the morphology of several deformed spherulites within which polar fan arrangements are clearly detailed. Thanks to the dentification of the boundaries of spherulite patterns, with a 0.7 μm resolution, the longitudinal and transverse elongations of larger numbers of spherulites are measured. The evolution of the volumetric plastic strains due to cavitation at the spherulitic scale along the necked regions is comprehensively analysed. Volume changes at this scale are highlighted, consisting of an increase in the case of void growth followed by a decrease at large strains due to the collapse of elongated voids. The effects of these results on the establishment of reliable constitutive model are discussed. It is found that accounting for plastic dilation is necessary for the accuracy of constitutive models.